Welcome to Brome Bird Care Support

Replace the Spring on the Nut (video)

< Back

Replacing the Spring on the Squirrel Buster®Nut

Video Tutorial

If you prefer to read the instructions, please follow below.

Here are the steps to replace the spring cartridge on the Nut.

 

1.Hold the yellow tension adjustment dial with one hand and with your other hand unscrew the nut.

2.Remove the nut, the dial, the red washer (being careful not to lose it) and the base.

3.Unscrew the tube.

4.Remove the tube, the mesh and the spring cartridge.

5.Replace the other spring inside.

6.To make it easier to put everything back together, flip it upside down.

7.Put the base back on, the red washer, the yellow dial and screw the nut back on.

8.Put the mesh back on (making sure that it sits inside the 3 tabs).

9.Locate the 3 notches in the yellow tension indicator and align with the 3 ribs inside the tube.

10.Twist the tube back on (making sure that the mesh does not stick on the outside).

Was this article helpful?
0 out Of 5 Stars
5 Stars 0%
4 Stars 0%
3 Stars 0%
2 Stars 0%
1 Stars 0%
How can we improve this article?